Archive for the ‘Mechanics’ Category

TUTORIAL: Replacing bearings in a Goldtec track hub

TUTORIAL: Replacing bearings in a Goldtec track hub

By Ben Butterfield | Mechanics

If you ride a lot, chances are you will need to replace your hub bearings [&hellip

TUTORIAL: Fitting a fixed gear cog and lockring

TUTORIAL: Fitting a fixed gear cog and lockring

By Ben Butterfield | Mechanics

Tools Required 1 x tub of copper grease 1 x chainwhip / lockring tool How [&hellip

TUTORIAL: How to replace a headset

TUTORIAL: How to replace a headset

By Ben Butterfield | Mechanics

So I found an old frame that had a fairly good headset but the headset [&hellip

TUTORIAL: DIY Headset Press

TUTORIAL: DIY Headset Press

By Ben Butterfield | Mechanics

1. BUY THE PARTS A) 1 x M12 Threaded rod at least 30cm long B) [&hellip

TUTORIAL: Parts needed to convert a bicycle from geared to fixed gear or single speed

TUTORIAL: Parts needed to convert a bicycle from geared to fixed gear or single speed

By Ben Butterfield | Mechanics

If this is your first time building a fixed gear or single speed bike, then [&hellip

css.php